Replacing An Ink Cartridge - Epson 1000 ICS Basics Manual

2. Press the left Menu button on the control panel several times until you see
Head Alignment
Scan
3. On the test page, select the pattern with the two vertical lines most precisely
printed on top of each other. You may need to use a magnifying glass or loupe.
Select one pattern each for rows 1, 2, and 3.
4. Use the Value buttons to select the number of the best pattern for the first row,
then press the x
5. If pattern 8 was the best aligned in each row, your print head is properly aligned.
If other patterns were better aligned, repeat the steps above.

Replacing an Ink Cartridge

If the light on the EPSON 1000 ICS is flashing and you see an ink low or ink
Error
out message, or you see that your ink levels are low in the status monitor that appears
on your screen, you may need to replace one of the cartridges.
and then press the x
Clear
Menu
Clear all
(3sec.)
left Menu button
button. Repeat this step for the second and third rows.
Copy
button to print a test page.
Copy
B&W
Copies
Color
Value
Print
Copy
Copy button
Maintenance
27