Epson 1000 ICS Basics Manual page 37

4. Press the release button, lift up the scanner, then clean ink out of the interior with
a soft, damp cloth.
don't touch
the metal
carriage shaft
5. Carefully lower the scanner and press it down until it clicks into place.
6. If the document table glass gets dirty, clean it with a soft, dry, lint-free cloth.
Paper towels are not recommended for cleaning the glass. If the glass is stained
with grease or other hard-to-remove material, use a small amount of glass cleaner
on a soft cloth to remove it. Wipe off any remaining liquid with a dry cloth.
7. Be sure there's no dust on your document table. Dust can cause white spots to
appear in your scanned image.
Don't touch the gears inside the EPSON 1000 ICS.
Be careful not to wipe the metal carriage shaft.
Never use a hard or abrasive brush, or alcohol or thinner for cleaning; they
can damage the printer components, document table, and case.
Don't get water on the components and don't spray lubricants or oils
inside the EPSON 1000 ICS.
Don't use any cleaning sheets included with special paper; they may jam
inside the EPSON 1000 ICS.
32
Cleaning the EPSON 1000 ICS
press the
release
button