Fujitsu ServerView Respurce Orchestrator Virtual Edition V3.1.0 User Manual page 75

b.
Click <Add> on the [Registry Replication] tab.
The [Registry Key] window will be displayed.
c.
Configure the above registry key in [Root registry key].
d.
Click <OK>.
e.
After configuration of the registry keys is complete, click <Apply>.
f.
Click <OK> to close the dialog.
4.
Assign the manager's shared disk and IP address to the secondary node.
Right-click [Services and Applications]-[RC-manager] on the Failover Cluster Management tree, and select [Move this service or
application to another node]-[1 - Move to node
The name of the secondary node is displayed for
5.
Change the manager IP address on the secondary node.
On the secondary node, use the rcxadm mgrctl modify command to set the new IP address.
Use the same IP address as the one set in step 2.
6.
Assign the manager's shared disk and IP address to the primary node.
Right-click [Services and Applications]-[RC-manager] on the Failover Cluster Management tree, and select [Move this service or
application to another node]-[1 - Move to node
The name of the primary node is displayed for
7.
On the primary node, take the manager's shared disk and IP address offline.
[Linux Manager]
1.
Change the IP address set for the admin LAN.
Set a new IP address on the primary node using the following command.
# /opt/FJSVrcvmr/bin/rcxadm mgrctl modify -ip
2.
De-activate the admin server's takeover logical IP address.
Use the PRIMECLUSTER GLS command-line interface to de-activate the takeover logical IP address.
For details, refer to the PRIMECLUSTER Global Link Services manual.
3.
Register the takeover logical IP address as a PRIMECLUSTER resource.
Use the PRIMECLUSTER GLS command-line interface to register the virtual interface as a PRIMECLUSTER resource.
For details, refer to the PRIMECLUSTER Global Link Services manual.
4.
Mount the shared disk
Mount the shared disk for managers on the primary node.
5.
Change the settings of the DHCP service (When registering the admin LAN subnet)
When registering an admin LAN subnet, change the file below and set the DHCP server for the takeover logical IP address.
-
File name
-
Red Hat Enterprise Linux 5
/etc/dhcpd.conf
-
Red Hat Enterprise Linux 6
/etc/dhcp/dhcpd.conf
Change the takeover logical IP address in the following line to the new takeover logical IP address.
option dhcp-server-identifier
node_name ] from the displayed menu.
node_name .
node_name ] from the displayed menu.
node_name .
IP_address <RETURN>
takeover logical IP address ;
- 60 -