Registering Blade Servers - Fujitsu ServerView Respurce Orchestrator Virtual Edition V3.1.0 User Manual

SNMP Community
Enter the SNMP community that was set on the chassis management blade.
Select either "public" or enter an arbitrary string.
Enter a string of up to 32 alphanumeric characters, underscores ("_"), and hyphens ("-").
3.
Click <OK>.
The mounted chassis will be displayed under the server resource tree.
Any server blade mounted within this chassis will be detected automatically and shown as: [
Slot_number [Unregistered]].
The only operation available for those unregistered server blades is server registration, while the ROR console can only display
their hardware statuses and properties.
If the manager is installed on one of those server blades, this blade will be shown as: [
In that case, server registration will not be available for the admin server, but its hardware status and properties will be displayed
in the ROR console.

7.3.2 Registering Blade Servers

To register a blade server (PRIMERGY BX series), its enclosing chassis must be registered first.
When using VIOM for I/O virtualization, VIOM server profiles should be registered in advance according to the procedure described in
"7.1.1 Registering VIOM Server
To register blade servers other than PRIMERGY BX servers, refer to
Profiles".
chassis_name - Slot_number [Admin Server]].
"7.4 When Using Rack Mount and Tower
- 28 -
chassis_name -
Servers".