Fujitsu ServerView Respurce Orchestrator Virtual Edition V3.1.0 User Manual page 168

Target Resources
Specify the power monitoring target to export the power consumption data of.
Select the checkboxes of each desired target. More than one target can be selected.
Data Type
Specify the type of data to export.
Check the checkbox of each desired data type. More than one data type can be selected.
Output time span
Select the time span for which to export data from the drop-down menu.
Select one of the following options:
-
Last hour
-
Last day
-
Last week
-
Last month
-
Last year
-
Custom
When "Custom" is selected, the following fields must all be specified:
-
Start day
-
Start time
-
End day
-
End time
Rate
Select the data sampling rate to export from the drop-down menu.
Select one of the following options:
-
Finest sampling
-
Hourly
-
Daily
-
Monthly
-
Annual
3.
Click <OK>.
In the download dialog that is displayed, specify the name of the export file. The data will be exported to the specified file.
Note
Exporting large amounts of data will take time.
The operation will fail when it takes over five minutes.
If the operation fails, as processing on the server may not have finished, wait for a while before performing the operation again. In that
case, change the settings of "Target Resources" and "Output time span" to reduce the amount of data output.
The recommended export settings for environmental data are as listed below.
Table 19.1 Recommended Export Settings
Rate
Finest sampling Last day
Hourly Last month
Output time span Output device count
12
30
- 153 -