Fujitsu ServerView Respurce Orchestrator Virtual Edition V3.1.0 User Manual page 219

Windows/linux
Hide thumbs Also See for ServerView Respurce Orchestrator Virtual Edition V3.1.0:
Table of Contents

Advertisement

ip_address
Enter the same IP address as that set within the server's operating system.
Enter a string of numeric values (between 0 and 255) and periods.
Note
IP addresses should be unique between all resources.
mac_address
Enter the MAC address of the admin LAN network interface: NIC1 (Index1).
Enter a string delimited by hyphens ("-") or colons (":") ("xx-xx-xx-xx-xx-xx" or "xx:xx:xx:xx:xx:xx").
second_mac_address
Enter the MAC address of the network interface used for the HBA address rename setup service or for admin LAN redundancy.
The second network interface (Index 2) should be used.
Enter a string delimited by hyphens ("-") or colons (":") ("xx-xx-xx-xx-xx-xx" or "xx:xx:xx:xx:xx:xx").
Note
-
This field can be omitted in the following cases.
- When not using the HBA address rename setup service
- When not using GLS for admin LAN redundancy on the managed server
- For a spare server whose primary servers are not using admin LAN redundancy
-
The "second_mac_address" header is the equivalent of the "hbaar_mac_address" header defined in RCXCSV V3.0.
"hbaar_mac_address" can only be used when "RCXCSV,V3.0" is specified at the top of the imported system configuration
file.
However, this header is automatically changed to "second_mac_address" when exporting a new system configuration file.
snmp_community_name
Enter the name of the SNMP community (read permission) assigned to this server.
Enter a string of up to 32 alphanumeric characters, underscores ("_"), and hyphens ("-").
Note
This field is not necessary when using servers other than the PRIMERGY series.
ipmi_ip_address
Enter the IP address of this server's remote management controller.
Enter a string of numeric values (between 0 and 255) and periods.
Note
IP addresses should be unique between all resources.
ipmi_user_name
Enter the name of a remote management controller user account with administrative privileges.
Enter a string of up to 16 alphanumeric characters and symbols (ASCII character codes: 0x20 to 0x7e).
- 204 -

Advertisement

Table of Contents
loading

Table of Contents