Fujitsu ServerView Respurce Orchestrator Virtual Edition V3.1.0 User Manual page 180

Popup Menu
Menu
Reboot
Reboot (Forced)
Switchover
Spare Server (*1, *3, Failback
*4)
Takeover
Set
Maintenance Mode
(*1, *4)
Release
Backup
Backup/Restore (*1,
*4)
Restore
Collect
Cloning (*1, *8)
Deploy
Settings
VM Home Position
Clear
(*1, *7)
Back to Home
External Management
-
Software (*1, *9)
VM Management
-
Console (*4, *7, *10)
Migrate VM Guest
-
(*11)
*1: Cannot be selected for a VM guest.
*2: Available only for VM hosts when using PRIMEQUEST.
*3: Cannot be selected for PRIMEQUEST.
*4: This option may or may not be available according to the server virtualization software used. For details, refer to "D.1 Common
Functions of Server Virtualization Software" in the "Design Guide VE".
*5: Available only for PRIMERGY BX servers.
*6: Cannot be set for PRIMERGY BX900/BX400 LAN switch blades operating in IBP mode.
*7: This menu is not available for a physical OS.
*8: Cannot be selected for a VM host.
*9: Available only for PRIMERGY series, PRIMEQUEST, SPARC Enterprise M series, and SPARC M10 servers.
*10: To use this feature, a VM management console must be installed and the admin client must be configured properly.
After installing the VM management console, select this menu item and follow the instructions shown in the displayed dialog.
*11: Available only for VM guests.
Table A.7 Popup Menus Available for Physical OSs [Solaris]
Popup Menu
Menu
Delete -
Update -
Spare Server Settings
Modify
Monitoring Settings
Submenu
Reboots a server after shutting down its operating
system.
Reboots a server without shutting down its operating
system.
Switches over a server with one of its spare servers.
Switches back a server to its pre-switchover state.
Accepts a switched over configuration as final (without
switching back to the original configuration).
Places a server into maintenance mode.
Sets a server to active mode.
Backs up a system image from a server.
Restores a system image to a server.
Collects a cloning image from a server.
Deploys a cloning image to a server.
Sets VM Home Position.
Clears VM Home Position.
Migrates a VM guest to VM Home Position.
Opens external server management software.
Opens the VM management console installed on the
client machine.
Migrates a VM guest to a different VM host.
Submenu
Deletes a SPARC Servers/SPARC Enterprise.
Updates a SPARC Servers/SPARC Enterprise.
Modifies a server's recovery settings.
Modifies a SPARC Servers/SPARC Enterprise's
monitoring settings.
- 165 -
Function
Function