Server Attributes; A.6.2 Server Attributes - Fujitsu ServerView Respurce Orchestrator Virtual Edition V3.1.0 User Manual

A.6.2 Server Attributes

General Area
Physical server name
The name used to identify a server is displayed.
Model name
The model name of the server is displayed.
When the server has been registered as a managed server and powered on, the server model name obtained from ServerView
Operations Manager is displayed. For other servers, no model name is displayed.
Product name
The product name of the server is displayed.
For PRIMERGY BX servers, the product name obtained from the management blade is displayed. For other servers, the model
name is displayed.
Status
Server status is displayed.
Slot
A slot number representing the mounted location is displayed.
Displayed only for PRIMERGY BX servers.
Partition ID
The partition number is displayed.
Only displayed when a PRIMEQUEST, or a SPARC Enterprise M4000/M5000/M8000/M9000 server, or a server in a SPARC
M10-4S is selected.
Maintenance Mode
The operational status of the server is displayed.
One of the following is displayed:
-
active
-
maintenance
Not displayed when SPARC Servers/SPARC Enterprise are selected.
LED status
The illumination status of the maintenance LED is displayed.
Displayed only for PRIMERGY BX servers.
Admin LAN (MAC address 1)
The MAC address of the NIC used for the admin LAN is displayed.
Not displayed when SPARC Servers/SPARC Enterprise are selected.
CPU type
The type of CPU is displayed.
When using servers other than the following, a hyphen ("-") is displayed.
-
PRIMERGY BX Series Servers
-
SPARC Enterprise M-Series
-
SPARC M10
CPU clock speed
CPU clock speed (frequency) is displayed.
When using servers other than the following, a hyphen ("-") is displayed.
-
PRIMERGY BX Series Servers
- 175 -