Fujitsu ServerView Respurce Orchestrator Virtual Edition V3.1.0 User Manual page 227

spare_server
Enter the physical server name of a server to be assigned as a spare server.
To specify multiple spare servers, separate each server name using semicolons (";"). To remove current spare server settings, enter
"-DELETE".
vlan_switch (optional)
Specify whether VLAN settings or port group settings should be automatically transferred to the spare server when a server
switchover occurs. Enter "ON", "OFF" or a hyphen ("-").
auto_switch (optional)
This value defines whether to trigger an automatic switchover upon detection of a server failure. Enter "ON", "OFF" or a hyphen
("-").
boot_type
Enter the boot type of the server. Enter one of the following.
-
SAN boot
"SAN"
-
For local boot
"local"
-
When using the VIOM server profile to conduct boot settings
Hyphens, ("-")
spare_server_force_off
Enter whether the spare server is turned off forcibly, when switching over to the spare server. Enter "ON", "OFF" or a hyphen
("-").
spare_server_with_vm_guest
Enter whether the server is switched to a VM host on which a VM guest exists. Enter "ON", "OFF" or a hyphen ("-").
VM Management Software Information
-
Section Name
Enter [VMManager] as the section name.
-
Section Header
operation
Enter the desired operation for the current line. Enter a hyphen ("-") to skip this line.
name
Enter the name used to identify this VM management software. Enter one of the following.
-
When using VMware vCenter Server as VM management software.
"vCenterServer"
-
When using System Center Virtual Machine Manager as VM management software.
"SCVMM"
ip_address
Enter the IP address used to connect to this VM management software or a hyphen ("-").
Enter a string of numeric values (between 0 and 255) and periods.
If a hyphen ("-") is entered, this VM management software will be seen as being installed on the admin server.
- 212 -