Configuring The Irmc S2/S3 Over The Irmc S2/S3 Web Interface; Configuring The Lan Parameters - Fujitsu Remote Management User Manual

Configuring the iRMC S2/S3 over the iRMC S2/S3 web interface

3.4 Configuring the iRMC S2/S3 over the
iRMC S2/S3 web interface
Ê Start the iRMC S2/S3 web interface (see
iRMC S2/S3 web interface" on page
3.4.1

Configuring the LAN parameters

Ê In the navigation area, click Network Settings (see
- Configure the LAN parameters" on page
Configuring the LAN settings
Ê Configure the LAN settings on the Network Interface page. See the
"Network Interface Settings - Configure Ethernet settings on the iRMC
S2/S3" on page 239
Configuring ports and network services
Ê Configure the ports and network services on the Ports and Network Services
page. See the
network services" on page 245
Configuring DHCP/DNS (Dynamic DNS)
Ê Configure the DHCP and DNS settings in the DNS Configuration page. See
the section "DNS Configuration - Configuring DNS for the iRMC S2/S3" on
page 249 for the settings required.
iRMC S2/S3
for the settings required.
section "Ports and Network Services - Configuring ports and
for the settings required.
section "Logging into the
136).
section "Network Settings
238).
section
63