Fujitsu Remote Management User Manual page 31

– Backing up several BIOS parameters in ServerView® WinSCU XML
format and restoring them in ServerView® WinSCU XML format from a
file.
– Updating BIOS via "upload from file" or via TFTP.
For some server types, you can select the Low Noise mode under
Power Consumption Options (iRMC S3 only).
iRMC S2/S3 - integrated Remote Management Controller
(edition November 2011)
This manual refers to the iRMC S2/S3 firmware version 5.5x and replaces the
following online manual: "iRMC S2 - integrated Remote Management
Controller", May 2011 edition.
The following topics are no longer part of this manual:
– Former section "4.4 Global user management for the iRMC S2/S3". As of
SVOM V5.50, this section will be integrated in the "User Management in
ServerView" manual.
– Description of the Server Configuration Manager dialog pages (former
sections 9.2 and the following). Instead, the reader is advised to use the
Online Help of the Server Configuration Manager.
iRMC S2/S3 - integrated Remote Management Controller
(edition May 2011)
This manual refers to the iRMC S2/S3 firmware version 5.5x and replaces the
following online manual: "iRMC S2 - integrated Remote Management
Controller", April 2011 edition.
The manual applies to both iRMC S2 and iRMC S3. Functional differences in
between the iRMC S2 and the iRMC S3 are pointed out separately in the
manual.
iRMC S2 - integrated Remote Management Controller (edition April 2011)
The April 2011 edition of the iRMC S2 manual refers to the iRMC S2 firmware
version 5.5x and replaces the following online manual: "iRMC S2 - integrated
Remote Management Controller", July 2010 edition.
New iRMC S2 features:
iRMC S2/S3
Changes compared with the previous version
31