Fujitsu Remote Management User Manual page 69

Permissions to use special iRMC S2/S3 functions
In addition to the channel-specific permissions, you can also individually assign
users the following permissions:
– Configure User Accounts
Permission to configure local user identifications
– Configure iRMC S2/S3 Settings
Permission to configure the iRMC S2/S3 settings.
– Video Redirection Enabled
Permission to use Advanced Video Redirection (AVR) in "View Only" and
"Full Control" mode
– Remote Storage Enabled
Permission to use the Remote Storage functionality
Preconfigured user ID
The firmware of the iRMC S2/S3 provides a default administrator ID for the
iRMC S2/S3 which possesses all permissions:
Administrator ID:
Password:
I
Both the administrator ID and the password are case-sensitive in the
case of local users.
It is urgently recommended that you create a new administrator account
as soon as possible once you have logged in, and then delete the default
administrator account or at least change the password for the account
(see section "User Management" on page
iRMC S2/S3
admin
admin
User permissions
263).
69