Bios-Specific Commands - Fujitsu Remote Management User Manual

IPMI OEM Commands supported by the iRMC S2/S3
C0 1A - Set Video Display On/Off
This command allows you to switch the local console on or off.
Request Data
Response Data

12.1.2.6 BIOS-specific commands

F1 09 - Get BIOS POST State
This command provides information whether BIOS is in POST.
Request Data
Response Data
400
- C0 NetFnlLUN: OEM
- 1A Cmd : Command Group Fan Test
1 00 = Set Video Display On
01 = Set Video display Off
- C4
- 1A
1 Completion Code
- B8 NetFnlLUN: OEM/Group
- F1 Cmd : Command Group BIOS
1:3 80 28 00 IANA-Enterprise-Number FTS, LS Byte first
4 09 Command Specifier
- BC
- F1
1 Completion Code
2:4 80 28 00 IANA-Enterprise-Number FTS, LS Byte first
5 [7:1] - reserved
[0] - BIOS POST State : 0 = BIOS is not in POST
1 = BIOS is in POST
iRMC S2/S3