Fujitsu Remote Management User Manual page 317

Operating iRMC S2/S3 via Telnet / SSH (Remote Manager)
Ê In the connection bar, click Connect.
As soon as the connection to the iRMC S2/S3 has been established, you are
requested to enter the user name and password.
– Logging into the Remote Manager over an SSH connection
I
If the host key of the managed server is not yet registered at the
remote workstation, the SSH client issues a security alert with
suggestions on how to proceed.
The following login window is displayed:
Figure 196: SSH connection: Logging in to the Remote Manager
Ê Enter your user name and password and confirm your entries by
clicking Login.
The main menu of the Remote Manager is then displayed (see
figure 198 on page
iRMC S2/S3
319).
317