Fujitsu Remote Management User Manual page 267

User Information - Configuring user access data
The User Information group allows you to configure the access data for the user.
Figure 153: User Management - User "<name>" Configuration page, User Information
User Enabled
Disable this option to lock the user.
Name
Enter the name of the user.
Password
Enter the user password.
Confirm Password
Confirm the password by entering it again here.
User Description
Enter a general description of the configured user here.
User Shell
Select the desired user shell here.
The following options are available:
– SMASH CLP
See section "Start a Command Line shell... - Start a SMASH CLP
shell" on page
– Remote Manager
See chapter "iRMC S2/S3 via Telnet/SSH (Remote Manager)" on
page 321.
– IPMI Terminal Mode
– None
Click Apply to activate your settings.
Ê
iRMC S2/S3
340.
User Management
267