Working With Expansion Cards - Handspring Treo 90 User Manual

Working with expansion cards

The expansion slot on your handheld enables you to add Secure Digital (SD) cards and
MultiMedia Cards (MMC) that extend the functionality and storage capacity of your handheld.
Your Treo comes with a mock, non-functional card inside the expansion slot. When you do not
have a functioning card inside the expansion slot, reinsert the mock card to protect the slot
opening.
To insert and remove an expansion card:
1. Press down and release the mock card.
2. After you feel the expansion slot eject the mock card, remove the card from the expansion
slot.
3. Hold the card so it is facing in the same direction as the card icon on the back of your
handheld.
4. Insert the card into the expansion slot until you feel the card lock into place and hear the
confirmation tone.
5. When you're done using the expansion card, repeat steps 1 and 2 to remove the expansion
card.
6. Reinsert the mock card to keep the expansion slot clean.
Page 44 Managing Your Applications