Beaming Problems - Handspring Treo 90 User Manual

I cannot launch the
HotSync Manager.
I am using Outlook as
my PIM, but I cannot do
a HotSync operation.

Beaming problems

Problem
I cannot beam data to
another IR-equipped Palm
OS device.
When someone beams data
to my handheld, I get a
message telling me it is out of
memory.
Appendix B
Make sure you are not running another program, such as
America Online, CompuServe, or WinFax, that uses the port you
selected in the Setup dialog box.
Reinstall the Palm Desktop software.
Click the HotSync Manager and choose Custom. Make sure
that the following Outlook conduits are installed and that the
Action is set to "Synchronize the files" for each conduit:
Outlook Contacts, Outlook Calendar, Outlook Tasks, and
Outlook Notes.
Reinstall the Palm Desktop software and make sure you select
the option to synchronize with MS Outlook.
Solution
Confirm that your handheld and the other device is clear
of obstacles.
Check the General Preferences screen and make sure
the Beam Receive setting is on.
Move your handheld closer to the receiving device.
Move your handheld farther away from the receiving
device.
Angle the sides of the two devices towards each other.
Perform a soft reset. See page 214 for details.
Your handheld requires at least twice the amount of
memory available as the data you are receiving. For
example, if you are receiving a 30K application, you must
have at least 60K free.
Perform a soft reset. See page 214 for details.
Page 223