Connecting the HotSync cable
The HotSync cable that comes with your Treo enables you to charge your handheld battery and
to synchronize the information on your handheld using HotSync technology.
Note:
If your computer does not have a USB port, or it uses Windows 95 or Windows NT, you
need a serial HotSync cable to connect to your computer. You can purchase a serial
HotSync cable from www.handspring.com.
To connect the HotSync cable:
1. Connect the travel charger cable to the short end of the Hotsync cable. Be sure to match the
sides of the connectors labeled "UP."
2. Connect the USB HotSync cable to a USB port on your computer, or connect the Serial
HotSync cable to a Serial port on your computer.
3. Connect the long end of the HotSync cable to your handheld with the button facing up.
Chapter 1
USB cable and port
Serial cable and port
Page 23