Connecting To Your Service; Creating Additional Service Templates - Handspring Treo 90 User Manual

To use a calling card:
1. Tap the Use calling card check box to select it.
Select this
box to use a
calling card
2. Enter your calling card number on the Use calling card line.
Note: It's a good idea to add at least three commas at the beginning of your calling card
number to compensate for the cue delay.
Tip: MCI customers must enter the calling card number in the Phone # field, and the
phone number in the Use Calling Card field.
3. Hold Option and press Return

Connecting to your service

After you set your Connection and Network Preferences, establishing a connection to your
Internet Service Provider (ISP) or your company's network (dial-in server) is easy.
To establish a connection:
Tap Connect to dial the current service and display the Service Connection Progress
messages.
Tip: To see expanded Service Connection Progress messages, press the bottom scroll
button.
To close a connection:
Tap Disconnect to terminate the connection between your handheld and your service.

Creating additional service templates

You can create additional service templates from scratch or by duplicating existing templates and
editing information. After you create a new or duplicate template, you can add and edit settings.
To add a new service template:
1. Press Menu
2. Under Service, select New (/N).
A new service template (called Untitled) is added to the Service pick list.
Chapter 7
to finish.
.
Enter your
calling card
number here
Page 147