Performing An Ir Hotsync Operation - Handspring Treo 90 User Manual

The HotSync Manager is now communicating with the simulated port defined for infrared
communication.
Note: You cannot use your cable again until you reconfigure the HotSync Manager to
communicate with the port defined for cable synchronization.
To configure HotSync Manager for infrared communication with Windows 2000
and Windows XP:
1. If necessary, start HotSync Manager.
2. Click the HotSync Manager icon
3. Choose InfraRed from the HotSync Manager menu.

Performing an IR HotSync operation

After you complete the steps to prepare for an IR HotSync operation it is easy to perform the
actual operation.
To perform an IR HotSync operation:
1. Press Option
2. Use the scroll buttons to select the HotSync icon
3. Press Return
4. Tap Local.
5. Tap the pick list below the HotSync icon and select IR to a PC/Handheld.
6. Position your handheld's IR port within a couple of inches of your computer's infrared port.
7. Tap the HotSync icon to start the IR HotSync operation.
Chapter 8
in the Windows system tray.
and then press Menu
to launch the application.
to access the Applications Launcher.
.
Page 163