Entering A Password; Selecting A Connection - Handspring Treo 90 User Manual

Entering a password

The Password box identifies the password you use to log into your server or ISP. Your entry in
this field determines whether your handheld prompts you to enter a password each time you log
into your network:
If you do not enter a password, your handheld displays the word "Prompt" in this field and asks
you to enter a password during the login procedure.
If you enter a password, your handheld displays the word "Assigned" in this field and does not
prompt you to enter a password during the login procedure.
Note: If you are concerned about security, select the Prompt option and do not enter a
password.
To enter a password:
1. Tap the Password field.
2. Enter the password you use to log into your server.
3. Hold Option
Note: The Password field updates to display the word "Assigned."

Selecting a connection

The Connection Preferences settings tell your handheld about the hardware you are using for
remote data connections. For example, you can use a data-enabled mobile phone with an IR port
or a special cable to connect the phone to your handheld. See the section that begins on page
139 for details on how to configure Connection Preferences.
To select a connection:
1. Tap the Connection pick list.
The list displays the configurations in your Connection Preferences panel.
Page 144
Tap here
and press Return
Enter password here
to finish.
Setting Preferences for Your Handheld