Selecting The Conduits For A Modem Hotsync Operation; Performing A Modem Hotsync Operation - Handspring Treo 90 User Manual

Selecting the conduits for a modem HotSync operation

The Conduit Setup dialog box on your handheld enables you to define which files and/or
applications synchronize during a modem HotSync operation. You can use these settings to
minimize the time required for modem synchronization.
To change the Conduit Setup for a modem HotSync operation:
1. Press Option
2. Use the scroll buttons to select the HotSync icon
3. Press Return
4. Press Menu
5. Under Options, select Conduit Setup (/D).
6. Tap the check boxes to deselect the files and applications that you do
during a modem HotSync operation. The default setting is to synchronize all files.
Note: Applications that do not have a database (such as games) do not synchronize — even
if you select the item in the Conduit Setup dialog box.
7. Hold Option

Performing a modem HotSync operation

After you prepare your computer and your handheld, and select your Conduit Setup options, you
are ready to perform a modem HotSync operation.
To perform a modem HotSync operation:
1. Press Option
2. Use the scroll buttons to select the HotSync icon
3. Press Return
4. Tap the Modem icon
5. Wait for the HotSync operation to finish. If you have any problems conducting a successful
HotSync operation, see Appendix B
Chapter 8
and then press Menu
to launch the application.
.
and press Return
and then press Menu
to launch the application.
to dial the desktop modem and synchronize the applications.
.
to access the Applications Launcher.
.
to finish.
to access the Applications Launcher.
.
not
want to synchronize
Page 167