Performing A Dial-In Network Hotsync Operation - Handspring Treo 90 User Manual

5. Click OK.
6. Connect your handheld to the cable and press the HotSync button.
The HotSync operation records network information about your computer on your handheld.
With this information, your handheld can locate your computer when you perform a HotSync
operation over the network.
To prepare your handheld for a dial-in network HotSync operation:
Note: If you are performing a network HotSync operation via a LAN, you do not need to prepare
your handheld and can skip to page 170.
1. Press Option
2. Use the scroll buttons to select the HotSync icon
3. Press Return
4. Press Menu
5. Under Options, select Modem Sync Prefs (/O).
6. Tap Network.
7. Hold Option
Note: See the section that begins on page 142 for information on configuring Network
HotSync preferences.

Performing a dial-in network HotSync operation

You are ready to perform a dial-in network HotSync operation after you prepare your computer
and handheld, and select your Conduit Setup options.
To perform a dial-in network HotSync operation:
1. Press Option
2. Use the scroll buttons to select the HotSync icon
Chapter 8
and then press Menu
to launch the application.
.
and press Return
and then press Menu
to access the Applications Launcher.
.
to finish.
to access the Applications Launcher.
.
Page 169