Timer
The timer is able to be used simultaneous with all 2 heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.
Setting and modification of the cooking time
Action
To select the heating zone
To select the power level
To select « Timer »
Decrease the time
Increase the time
After a few seconds the control light stops with blinking.
The time is confirmed and the cooking starts.
To stop the cooking time
Action
To select « Timer »
To stop the « Timer »
If they are several timer activated you must repeat this operation.
Automatic stop at the end of the cooking time
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound
rings and the heating zone stops.
To stop the sound and the blinking it is enough to press key [
Egg timer function
Action
Activate the hob
To select « Timer »
Decrease the time
Increase the time
After a few seconds the control light stops with blinking and the timer starts.
To stop the egg timer function
Action
Activate the hob
To stop the « Timer »
Control panel locking
To avoid modifying a setting of cooking zones , in particular with within the framework of
cleaning the control panel can be locked (with exception to the On/Off key [ 0/I ]).
Locking
Action
Start
Hob locking
Unlocking
Action
Start
Unlocking the hob
Control panel
Press key [ + ] or [ - ]
Press key [ + ] or [ - ]
Press key [
]
Press key [ - ]
Press key [ + ]
Control panel
Press key [
]
Press key [ - ] then [
Control panel
Press key [ 0/I ]
Press key [
]
Press key [ - ]
Press key [ + ]
Control panel
Press key [ 0/I ]
Press key [ - ] then [
Control panel
Press key [ 0/I ]
Press key [
]
Control panel
Press key [ 0/I ]
Press key [
]
21
Display
[ 4 ] or [ 9 ]
[ 1 ] ... [ 9 ]
[ 00 ] minutes
[ 30 ] to 29,28,27,...
The time increases...
Display
The remaining time
]
Displays [ 00 ] then stops
].
Display
The zone control lights are on
[ 00 ] minutes
[ 30 ] to 29,28,27,...
The time increases...
Display
Timer light blinking
]
Displays [ 00 ] then stops
Display
[ 0 ] or [ H ] on displays
[ 0 ] or [ H ] on displays
Locking light is on
Display
[ 0 ] on displays
[ 0 ] on displays
Locking light is off