Timer; Control Panel Locking - Foster 7322 230 User Manual

Timer

The timer is able to be used simultaneous with all 2 heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.
 Setting and modification of the cooking time
Action
To select the heating zone
To select the power level
To select « Timer »
Decrease the time
Increase the time
After a few seconds the control light stops with blinking.
The time is confirmed and the cooking starts.

To stop the cooking time
Action
To select « Timer »
To stop the « Timer »
If they are several timer activated you must repeat this operation.
 Automatic stop at the end of the cooking time
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound
rings and the heating zone stops.
To stop the sound and the blinking it is enough to press key [
 Egg timer function
Action
Activate the hob
To select « Timer »
Decrease the time
Increase the time
After a few seconds the control light stops with blinking and the timer starts.
 To stop the egg timer function
Action
Activate the hob
To stop the « Timer »

Control panel locking

To avoid modifying a setting of cooking zones , in particular with within the framework of
cleaning the control panel can be locked (with exception to the On/Off key [ 0/I ]).
 Locking
Action
Start
Hob locking
 Unlocking
Action
Start
Unlocking the hob
Control panel
Press key [ + ] or [ - ]
Press key [ + ] or [ - ]
Press key [ ]
Press key [ - ]
Press key [ + ]
Control panel
Press key [ ]
Press key [ - ] then [
Control panel
Press key [ 0/I ]
Press key [ ]
Press key [ - ]
Press key [ + ]
Control panel
Press key [ 0/I ]
Press key [ - ] then [
Control panel
Press key [ 0/I ]
Press key [ ]
Control panel
Press key [ 0/I ]
Press key [ ]
21
Display
[ 4 ] or [ 9 ]
[ 1 ] ... [ 9 ]
[ 00 ] minutes
[ 30 ] to 29,28,27,...
The time increases...
Display
The remaining time
] Displays [ 00 ] then stops
].
Display
The zone control lights are on
[ 00 ] minutes
[ 30 ] to 29,28,27,...
The time increases...
Display
Timer light blinking
] Displays [ 00 ] then stops
Display
[ 0 ] or [ H ] on displays
[ 0 ] or [ H ] on displays
Locking light is on
Display
[ 0 ] on displays
[ 0 ] on displays
Locking light is off