Connecting To Video Equipment - Sharp XV-Z21000 Operation Manual

Connecting to Video Equipment

Before connecting, be sure to unplug the power cord of the projector from the AC outlet and turn off the devices
to be connected. After making all connections, turn on the projector and then the other devices.
Connecting Equipment with HDMI Output Terminal to the HDMI Terminal on the Projector
HDMI is a new specialized interface capable of delivering a video and audio signal to the terminal using just one cable.
Since this projector does not support an audio signal by itself, use an amplifi er or other audio device.
For video connection, use a cable that conforms to HDMI standards. Using cables that do not conform to HDMI
standards may result in a malfunction.
To HDMI output terminal
Note
• HDMI (High-Defi nition Multimedia Interface) is a digital AV interface that can deliver a high-defi nition video
signal, multi-channel audio signal, and bi-directional control signal all in just one cable.
• Because it is compatible with the HDCP (High-bandwidth Digital Content Protection) system, the digital
video signal does not degrade when transmitted, and a high-quality image with a simple connection can
be enjoyed.
Connecting Equipment with the HDMI Output Terminal to the DVI Terminal on the Projector
To HDMI output terminal
Note
• When connecting the projector to the video equipment in this way, select "Signal Type" in the "Options"
menu. See page 44.
• When a DVI to HDMI conversion cable is connected to the HDMI terminal, a proper picture may not be
displayable.
-18
HDMI-compatible device
HDMI cable (type A)
(commercially available)
HDMI-compatible device
DVI to HDMI cable
(commercially available)
To HDMI1 or 2 terminal
To DVI terminal