Operating With The Remote Control; Switching The Iris Setting; Adjusting The Contrast; Adjusting The Quantity Of Light - Sharp XV-Z21000 Operation Manual

Operating with the Remote Control

Switching the Iris Setting

This function controls the quantity of the
projected light and the contrast of the image.
Press IRIS.
• Each time the button is pressed while the display
is on, the mode changes in the following order:
HIGH BRIGHTNESS MODE
HIGH CONTRAST MODE
Note
• For details, see page 37.

Adjusting the Contrast

1
Press CONTRAST.
2
Press \ or | to adjust the con-
trast.
3
Press ENTER.
Note
• For details, see page 36.

Adjusting the Quantity of Light

1
Press BRIGHT.
2
Press \ or | to adjust the quan-
tity of light.
3
Press ENTER.
Note
• For details, see page 36.
MEDIUM MODE
Adjustment buttons
" ' \ |
( / / / )
FREEZE
IRIS
BRIGHT

Freezing a Moving Image

1
Press FREEZE.
• The projected image is frozen.
2
Press FREEZE again to return
to the moving image from the cur-
rently connected device.

Selecting the Picture Mode

You can select the appropriate picture mode to best
match the projected image you are watching.
Press PICTURE MODE.
• Each time the button is pressed while the display
is on, the mode changes in the following order:
STANDARD NATURAL
MEMORY MOVIE2
Note
• For details, see page 36.
ENTER
PICTURE MODE
CONTRAST
DYNAMIC
MOVIE1
-29