Sharp XV-Z21000 Operation Manual page 22

Connecting to Video Equipment (Continued)
Connecting RGB Equipment to the DVI Terminal on the Projector
To RGB output terminal
Note
• When connecting the projector to the video equipment in this way, select "A. RGB" for "Signal Type" in
the "Options" menu. See page 44.
Connecting RGB Equipment to the COMPONENT/RGB Terminals on the Projector
To analog RGB
output terminal
Note
• The (HD/C sync) and (VD) terminals may be used depending on the specifi cations of the RGB equipment
connected to this projector. Please refer to the operation manual of the RGB equipment for details.
-20
DVD Player,etc.
DVI to D-sub cable
(supplied accessory)
DVD Player,etc.
5 RCA RGB cable
(commercially available)
To DVI terminal
To COMPONENT/RGB 1 or 2 terminals