[PICTURE] menu
[GAMMA]
Switch gamma mode.
1) Press ▲▼ to select [GAMMA].
2) Press ◀▶ or the <ENTER> button.
▶
z The [GAMMA] individual adjustment screen is
displayed.
3) Press ◀▶ to switch the [GAMMA].
▶
z The setting will change as follows each time
you press the button.
[DEFAULT]*
1
[2.8]
(0.1 increments)
[2.0]
*1: When [PICTURE MODE] is set to [DYNAMIC], [USER], or
[DICOM SIM.], [DEFAULT] cannot be selected.
Note
z DICOM is an abbreviation for "Digital Imaging and
Communication in Medicine" and is a standard for
medical imaging devices. Although the DICOM
name is used, the projector is not a medical device,
and should not be used for purposes such as
diagnosis of display images.
■ To change the name of [USER1]
▶
or [USER2]
4) Select [USER1] or [USER2] in Step 3).
5) Press the <ENTER> button.
▶
z The [GAMMA] screen is displayed.
6) Press the <ENTER> button.
▶
z The [GAMMA NAME CHANGE] screen is
displayed.
7) Press ▲▼◀▶ to select the character,
and press the <ENTER> button to
enter the character.
8) Press ▲▼◀▶ to select [OK], and
press the <ENTER> button.
▶
z The Select Gamma name is changed.
Note
z When a name is changed, display of [USER1] and
[USER2] on the menu is also changed.
68 - ENGLISH
[SYSTEM DAYLIGHT VIEW]
You can correct the image to the optimal vividness
even if it is projected under a bright light.
1) Press ▲▼ to select [SYSTEM
2) Press ◀▶ or the <ENTER> button.
3) Press ◀▶ to switch the [SYSTEM
[USER1]
[USER2]
[DICOM SIM.]
[1.0]
[SHARPNESS]
[1.8]
You can adjust the sharpness of the projected image.
1) Press ▲▼ to select [SHARPNESS].
2) Press ◀▶ or the <ENTER> button.
3) Press ◀▶ to adjust the level.
Press ▶ .
Press ◀ .
Note
z If you press ▶ while the adjustment value is [15],
DAYLIGHT VIEW].
▶
z The [SYSTEM DAYLIGHT VIEW] individual
adjustment screen is displayed.
DAYLIGHT VIEW].
▶
z The setting will change as follows each time
you press the button.
[OFF] (No
correction)
[3] (High)
▶
z The [SHARPNESS] individual adjustment
screen is displayed.
Operation
Adjustment
Contours become
sharper.
Contours become
softer.
the value will become [0]. If you press ◀ while the
adjustment value is [0], the value will become [15].
[1] (Low)
[2] (Medium)
Adjustment
range
0 - 15