Accessing From The Web Browser - Panasonic PT-DS20KU Operating Instructions Manual

Accessing from the Web browser

1) Start up the Web browser on the computer.
2) Enter the IP address set on the projector into the URL entry field of the Web browser.
3) Enter the user name and the password.
▶
z The factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the
password is panasonic (lower case).
4) Click OK.
▶
z The [Projector status] page is displayed.
Note
z If you use a Web browser to control the projector, set [WEB CONTROL] to [ON] in [NETWORK CONTROL]
( page 125).

z Do not perform setting or control simultaneously by starting up multiple Web browsers. Do not set or control the
projector from multiple computers.
z Change the password first.(
z The administrator rights allows to use all functions. The user rights allow use of [Projector status] (
confirmation of the error information page (
and [Change password] (
z Access will be locked for few minutes when an incorrect password is entered three times consecutively.
page 140)

page 129), [Network status] (

page 140) only.

[NETWORK] menu
page 130), [Basic control] (

ENGLISH - 127
page 128),

page 132),
