Panasonic PT-DS20KU Operating Instructions Manual page 173

Dlp projector
Hide thumbs Also See for PT-DS20KU:
Table of Contents

Advertisement

Model No.
Contrast ratio
<RGB 1 IN>
terminal
<RGB 2 IN>
terminal
<VIDEO IN>
terminal
<DVI-D IN>
terminal
<HDMI IN>
terminal
Terminals
<SDI IN 1>
terminal
<SDI IN 2>
terminal
<3D SYNC 1 IN/
OUT> terminal
<3D SYNC 2 OUT>
terminal
<SERIAL IN>/
<SERIAL OUT>
terminal
<REMOTE 1 IN>/
<REMOTE 1 OUT>
terminal
<REMOTE 2 IN>
terminal
<LAN> terminal
Power cable length
Outer case
PT-DZ21KU
10 000:1 (when [DYNAMIC IRIS] is set to [3])
1 set (BNC x 5 (RGB/YP
P
/YC
B
R
[RGB signal]
[YP
P
signal]
B
R
[Y/C signal]
1 set, high-density D-Sub 15p (female)
[RGB signal]
[YP
P
signal]
B
R
1 set, DVI-D 24 p single link, DVI 1.0 compatible, HDCP compliant
1 set, HDMI 19 pin, (HDCP and Deep color compatible)
1 set (BNC)
[SD-SDI signal]
[HD-SDI signal]
[3G-SDI signal]
[Dual link HD-SDI (LINK-A)
signal]
1 set (BNC)
[SD-SDI signal]
[HD-SDI signal]
[Dual link HD-SDI (LINK-B)
signal]
1 set (BNC)
During input setting TTL high impedance
During output setting TTL output max. 10 mA
1 set (BNC)
TTL output max. 10mA
D-Sub 9 p, each set, RS-232C compatible, for computer control
M3 stereo mini jack, each set, remote control for serial control
1 set, (for RJ-45 network connection, PJLink compatible, 10Base-T/100Base-TX)
PT-DS20KU
C
/YC x 1))
B
R
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
HD/SYNC TTL high impedance, automatic positive/negative
polarity compatible
VD TTL high impedance, automatic positive/negative polarity
compatible
Y: 1.0 V [p-p] including synchronization signal, P
75 Ω
Y: 1.0 V [p-p], C: 0.286 V [p-p] 75 Ω
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
HD/SYNC TTL high impedance, automatic positive/negative
polarity compatible
VD TTL high impedance, automatic positive/negative polarity
compatible
Y: 1.0 V [p-p] including synchronization signal, P
75 Ω
1 set, BNC 1.0 V [p-p] 75 Ω
SMPTE ST 259 compliant
SMPTE ST 292 compliant
SMPTE ST 424 compliant
SMPTE ST 372 compliant
SMPTE ST 259 compliant
SMPTE ST 292 compliant
SMPTE ST 372 compliant
1 set D-Sub 9 p for contact control
3.0 m (118-1/8")
Molded plastic
Specifications
PT-DW17KU
P
: 0.7 V [p-p]
B
R
P
: 0.7 V [p-p]
B
R
ENGLISH - 173

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-dw17kuPt-dz21kuPt-dz21kePt-ds20kePt-dw17kePt-ds21ke

Table of Contents