Menu Navigation; Navigating Through The Menu - Panasonic PT-DS20KU Operating Instructions Manual

Menu navigation

The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.

Navigating through the menu

■ Operating procedure ▶
button
1) Press the <MENU> button on the
remote control or control panel.
▶
z The [MAIN MENU] screen is displayed.
2) Press ▲▼ to select an item from the
main menu.
▶
z The selected item is highlighted in yellow.
3) Press the <ENTER> button.
▶
z The sub-menu items of the selected main menu
are displayed.
Menu navigation
4) Press ▲▼ to select a sub-menu, and
the ◀▶ buttons or the <ENTER>
button to change or adjust settings.
z For some items, press the ◀▶ button to ▶
display an individual adjustment screen with a
bar scale as shown in the following diagram.
Note
z Pressing the <MENU> button when the menu
screen is displayed returns to the previous menu.
z Some items may not be adjusted or used for
certain signal formats to be input to the projector.
The menu items that cannot be adjusted or used
are shown in gray characters, and they cannot
be selected. [DIGITAL CINEMA REALITY] and
[FRAME LOCK] may not be displayed depending
on signal input.
z Some items can be adjusted even if signals are not
input.
z Individual adjustment screen is cleared
automatically if no operation is performed for
approximately five seconds.
z For menu items, see "Main menu" (
"Sub-menu" ( pages 63 to 64).

z The cursor color depends on the [OSD DESIGN]
( page 94) settings on the menu. The selected item

is displayed with the yellow cursor by default.
z During portrait setting, the menu will be displayed
horizontally.
page 62) and

ENGLISH - 61