Craftsman 486.24209 Owner's Manual page 10

An'ACHING SWEEPER HITCH TO TRACTOR
• Race the tractor and sweeper on a fiat level surface.
• Set the sweeper height adjustment handle to about the
middle of its adjustment range.
• Attach the sweeper h_ch to the tractor h_ch, arranging
the 3/4" spacers in one of six possible combinations as
shown in GROUP A and GROUP B diagrams below.
IMPORTANT: To obtain the best performance from your
sweeper, arrange the spacers so that the sweeper bag is
approximately level with the ground and approximately 5" to
7" offthe ground as shown in figure 22.
BRUSH HEIGHT ADJUSTED
APPROXIMATELY MID-WAY
\
APPROXIMATELY LEVEL
(5" to 7" FROM SURFACE)
FIGURE 22
GROUP "A" - For vehicles with hitches
having 8" to 10" ground clearance.
/ HITCH BRACKET MOUNTED
/ BELOW HITCH TUBES
BLACK LINE IS TRACTOR HITCH
GROUP "B" - For vehicles with hitches
having 10" to 13" ground clearance.
\
HITCH BRACKET MOUNTED
ABOVE HITCH TUBE_
4<
BLACK LINE IS TRACTOR HITCH
10