SNOW
CHUTE
ASSEMBLY
1.
Remove back carriage bolt (See Figure 4).
ASSEMBLY
Shipping Position
2.
Tilt chute back into operating position (See Figure 5).
3.
Replace carriage bolt from inside of chute.
4.
Replace flatwasher
and nylon locknut on outside of
flange.
5.
Tighten carriage bolt securely.
NOTE: check all carriage bolts in flange for tightness.
DO NOT overtighten.
Remove Carriag_BBolt
Figure 4
t
Flange
Figure 5
F-OOIOO8J
8