3.6
Program selection and execution
3.6.1
Program selection
A different program may be selected and executed in each channel. The program is
executed in the channel where it is selected from.
To select a program, press the icon "Select program" of the softkey menu and the CNC
will show a list of all the programs available. See
page 22.
Once a program has been selected, its name appears on the general status bar. For
each channel, it shows the name of the program selected in that channel.
"2.5 File selection window"
Operating manual
on
3.
CNC 8070
(S
V03.0
)
OFT
X
57