Alarm Network - EverFocus EDR810H Instruction Manual

3.7.2 ALARM NETWORK

DVR can send out Alarm message to an Alarm Server. This function is reserved to work with our
Control Management System – PowerCon 4. In the ALARM of the NETWORK SETUP MENU,
we define:
1. PROTOCOL: Select which communication protocol with Alarm servers or Alarm receiving
clients.
TCP: communicate with client via TCP protocol.
UDP: communicate with client via UDP protocol
2. PORT NUMBER: setting the communication port with Alarm server. The default is 1600.
3. UNIQUE ID: setting the ID number of your DVR to Alarm server.
4. SERVER 1: assign the IP address of Alarm server 1.
5. SERVER 2: assign the IP address of Alarm server 2.
Diagram 3.11