Troubleshooting; Lanview Leds; Troubleshooting Checklist; Using Lanview - Enterasys 5H102-48 Installation Manual

Enterasys networks switch - ethernet hub user manual

Hide thumbs

Table Of Contents

Table of Contents

This chapter provides information concerning the following:

•

Using LANVIEW

•

Troubleshooting Checklist

•

Using the RESET Button

4.1

USING LANVIEW

The modules use a built-in visual diagnostic and status monitoring system called LANVIEW. The

LANVIEW LEDs

(Figure

network problems.

Viewing Receive and Transmit Activity

Only one group of segments may be viewed at a time.

To view the receive and transmit activity on a group of segments, press the GROUP SELECT

button (see

Figure

4-1) to step to the group of interest (Groups 1 through 4). Each time the GROUP

SELECT button is pressed, the GROUP LED lights up in sequence, indicating which Group is

selected. The receive and transmit activity for that group of segments is then indicated by the RX

and TX LEDs for each segment.

Fast Ethernet Speed LED

This LED indicates whether the port is in 10 Mbps or 100 Mbps Ethernet. When the LED is off,

the port is functioning at 10 Mbps. When the LED is on solid green, the speed is 100 Mbps.

(Section

4.1)

(Section

4.2)

(Section

4.3)

4-1) allow quick observation of the network status to aid in diagnosing