Enterasys 5H102-48 Installation Manual page 37

Table 4-1 LANVIEW LEDs
LED Color
CPU Off
Red
Amber
Green
Amber
and
Green
RX Off
(Receive)
Green
Amber
Red
State
Power off.
Solid. Hardware failure
has occurred.
Blinking. Image is being
loaded from Flash.
Solid. Boot PROM
diagnostics are running.
Solid. Unit is functional.
Booting. Blinks amber
and green while image is
loading.
No link. No activity or
port in standby. Port
enabled or disabled.
Solid. Link, port enabled,
no activity.
Blinking. Link, port
disabled.
Flashing. Link, port
enabled, activity.
Solid. Diagnostic failure.
Recommended Action
Ensure chassis has adequate power.
If the LED remains red for several
minutes, contact Enterasys Networks for
technical support.
None.
If the LED remains amber for more than
several minutes, contact Enterasys
Networks for technical support.
None.
None.
None.
None.
None.
None.
Contact Enterasys Networks for
assistance.
Using LANVIEW
Troubleshooting 4-3