Unpacking the Module
1. Open the box and remove the packing material protecting the module.
2. Verify the contents of the carton as listed in
Table 3-1 Contents of Module Carton
Item
One module, either the 5H102-48 or the 5H103-48
Antistatic Wrist Strap
RJ21 Angle Adapter
Manual Accessory Kit
3. Remove the tape seal on the non-conductive bag to remove the module.
4. Perform a visual inspection of the module for any signs of physical damage. Contact Enterasys
Networks if there are any signs of damage. Refer to
3-2
Installation
Table
3-1.
Quantity
1
1
4
1
Getting Help
for details.