[]
, When you add sound using the built-in microphone make sum not to connect
any cables to the M[C terminal (on the DU-300).
, To use your TV to monitor video, connect the S-video terminal ( 12221
29) or the
A/V terminal (use only the video plug) to your TV. You can monitor the sound
with headphones ( _ 65).
Turn the camera's
POWER
dial to VCR and load a recorded
cassette.
, Make sme the REC/SAVE
tab on the cassette
has been slid to REC (closed
position).
Do not connect/disconnect
any cables to/flom the camera when dubbing audio or
preparing to dub audio.
rn
F
MENU
/,vc. SET uP
L
( _ 381
_[_AUDIO
DUB...AUDIO
IN
1. Open
the menu,
select AUDIO
DUB.
2. Select AUDIO
IN or MIC. IN and close the menu.
3. Locate
the point where you want to start
audio dubbing,
then press
the PAUSE
button.
• You can use the playback buttons on the body of the camera or the special
playback functions on the wireless controller in the same way as in playback
mode.
• The camera becomes set to playback pause mode.
89