Rec Pause - Canon ELURA 2 MC Instruction Manual

Digital video camcorder
Table of Contents

Advertisement

?2
tit
1. Find a point on your recorded
cassette
slightly
before
the section
you want
to copy and set it to playback
pause mode.
2. Press the camera's
REC PAUSE
button.
• The camera enters record pause mode.
3. Start
playback
on tile other
digital device while you monitor
tile
picture.
4. Press the pause button.
• Recording starts.
5. When you get to the point where you want to stop recording,
press
the stop button
or the pause button.
, Recording stops.
6. Stop playback
on the other
device.
[]
• ff the cable is not connected properly, or if the cable is unconnected when you
press REC PAUSE, the camera displays the caution "CHECK THE DV
INPUT." An anomalous hnage may also flash onto the screen.
• Blanks between recordings on the playback tape are recorded as anomalous
images on the tape that is being recorded to.
• During DV dubbing you cannot add digital effects.
Certain pre-recorded software tapes are copyright protected. If you tU to play
back such a cassette, "COPYRIGHT PROTECTED PLAYBACK IS
RESTRICTED"
appears in the display for a few- seconds and then the camera
displays a blank blue screen; you cannot view- the contents of the cassette.
If you tW to record from such a tape via the digital cable "COPYRIGHT
PROTECTED DUBBING RESTRICTED"
appears in the display; you cannot
record the contents of the tape.
82

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Elura 2

Table of Contents