Canon ELURA 2 MC Instruction Manual page 13

[]
° The adapter can charge a single battery pack fiom either side, A or B. If you
attach two batte U packs, charging begins from the batte W you first attach to the
adapter, or. if the batteries are aheady attached to the adapter when you plug it
into an AC outlet, fiom the side labeled "A".
° When powering your camcorder fiom an AC outlet, you do not need to remove
batte U packs attached to the adapter, but charging will not take place until you
remove the DC coupler from the adapter
° Do not connect the power adapter to an unspecified product.
° You can find detailed notes for using the batteries in the "Notes on Using the
Batteries" ( _ 117). These notes include charging and recording times and how
to install the backup battery.
Spedfications
Power supply
Power consumption
Rated output
Operating temperature range
Dimensions
Weight
100-240 V AC, 50/60 Hz
40 W
Adapter mode : 7.2 V. 2.0 ADC
Charger mode : 8.4 V. 1.0/2.5 A DC
32°F-104°F (0°C-40°C)
3 x 4 3/4 x 2 I/8 in (75 x 120 x 53 ram)
8 7/s oz (250 g) (without power cable)
Weight and dnnensions are approximate.
Errors and omissions excepted.
Subject to change without notice.
When replacement of power supply is required, please return it to the
responsible nearest Canon Service Center and please replace it with the same
type number CA-400 or equivalent.
The Adapter can be used with a power supply between 100 and 240 V AC. For
areas where 120 V AC power is not used, you will need a special plug adapter
Contact your nearest Canon Service Center for fm-ther information.
¢D _0
6_
13