Canon ELURA 2 MC Instruction Manual page 100

-ELURA2 MC only-
Record images input through the DV in terminal onto the MultiMediaCard as still
images.
, The still image's data code will show the date and time it was originally
recorded.
/
/
0a-2
:80
.,=<
"_re
e-
"3
100
1. Connect the camera to the other digital device.
, Connect the Canon CV-150F DV cable (optional) with the sides of the plugs
marked with the arrows facing its shown above.
2. Prepare the other device.
• Turn on the power and load a recorded cassette.
3. Load a MultiMediaCard. Then
push
tile button next to tile
POWER dial and hold, and turn tile POWER dial to VCR.
, DV IN appears in the display.
, If you have a cassette inserted, make sure it is in stop mode.
1. Start playback on the other device.
2. When the image you want to record appears in the display, press
the PHOTO button halfway down and hold it.
• The image appears its a still image in the display.
, The number of flnages that can still be recorded on the MultiMediaCard
appears in the display.
3. Press the PHOTO button fully down to record the image to the
MultiMediaCard.
[]
• [f you record an image onto a MultiMediaCard that was originally recorded in
the 16:9 mode for widescreen TV's, the image will appear to be vertically
"squashed" (compressed).
• The shutter sound does not sound in VCR mode.