Windows Nt 3.1/3.51 Driver Installation; Installing Driver During Winnt 3.1/3.51 Installation - Asus PCI-DA2100 User Manual

Appendix A
3 Windows NT
Up to 4 ASUS PCI-DA2100/-DA2200 controllers can be installed in
one computer. The following files are supplied for driver installation,
to be found in the subdirectory \WINNT\V3_1 for Windows NT 3.1.
-
DA2000.SYS: ASUS PCI-DA2100/-DA2200 Miniport Driver for
Windows NT 3.1.
-
PCIDA: Tag file for driver installation.
-
OEMSETUP.INF: Information file for driver installation.
-
TXTSETUP.OEM: Information file for driver installation.
-
README.NT1: A text file describing the ASUS PCI-DA2100/-
DA2200 miniport driver.
The following files are supplied for driver installation, they are put
in the \WINNT\V3_5X subdirectory for Windows NT 3.5X.
-
DA2000.SYS: ASUS PCI-DA2100/-DA2200 Miniport Driver for
Windows NT 3.5X.
-
PCIDA: Tag file for driver installation.
-
OEMSETUP.INF: Information file for driver installation.
-
TXTSETUP.OEM: Information file for driver installation.
-
README.NT3: A text file describing the ASUS PCI-DA2100/-
DA2200 miniport driver.
3.1

Installing Driver During WinNT 3.1/3.51 Installation

Follow these steps only if Windows NT is not installed on your
computer or if you are upgrading to new version of Windows NT.
1. Use ASUS PCI-DA2100/-DA2200 BIOS Configuration Utility to
disable ISA Mailbox Emulation mode(default is disabled). To do
this, at system bootup, press [Ctrl-I], select Configure Card
option, then change IO Port Address to DISABLED.
2. Use ASUS Text RAID Manager to configure Logical Drives and
SCSI Devices and map them to valid SCSI-IDs/LUNs. Note that
SCSI ID 7 is reserved for the ASUS PCI-DA2100/-DA2200
controller and thus no logical drives or devices should be
mapped to this SCSI ID.
152
®
3.1/3.51 Driver Installation
ASUS PCI-DA2100/PCI-DA2200 User's Manual