Installing Netware 4.0X/4.1/4.11 - Asus PCI-DA2100 User Manual

10. Load the driver "DA2000.DSK" once for each installed ASUS
PCI-DA2100/-DA2200. This driver supports up to four ASUS
PCI-DA2100/-DA2200 controllers.
11. After each instance of the ASUS PCI-DA2100/-DA2200 driver
has been loaded successfully, continue with the operations of
Novell NetWare server described in NetWare User's Manual.
Notes:
The correct syntax in STARTUP.NCF file to load the ASUS PCI-
DA2100/-DA2200 drivers should resemble the following:
# load da2000 slot = x
x is the slot number of slot into which the ASUS PCI-DA2100/-
DA2200 has been plugged. The slot number is auto-detected by
ASUS PCI-DA2100/-DA2200 driver and shown on the system
console screen during ASUS PCI-DA2100/-DA2200 driver loading.
2.2

Installing NetWare 4.0x/4.1/4.11

1. Use the ASUS PCI-DA2100/-DA2200 BIOS Configuration Utility
to disable ISA Mailbox Emulation mode(default is disabled). To
do this, at system bootup, press [Ctrl-I], select Configure Card
option, then change IO Port Address to DISABLED.
2. Use ASUS Text RAID Manager to configure Logical Drives and
SCSI Devices and map them to valid SCSI-IDs/LUNs. Note that
SCSI ID 7 is reserved for the ASUS PCI-DA2100/-DA2200
adapter and thus no logical drives or devices should be
mapped to this SCSI ID.
3. For installation of a new server, follow these procedures:
4. If your NetWare installation package is a CD-ROM version and
the CD-ROM Drive used to perform the installation is connected
to an ASUS PCI-DA2100/-DA2200 controller, make sure the
ASUS PCI-DA2100/-DA2200 ASPI manager "DA2000.SYS", CD-
ROM driver "ASPICDRM.SYS", and Microsoft
extension program "MSCDEX.EXE" are specified in the MS-
DOS files CONFIG.SYS and AUTOEXEC.BAT.
®
5. Plug up to four ASUS PCI-DA2100/-DA2200 controllers into
host PCI slots then power on. ASUS PCI-DA2100/-DA2200 BIOS
ASUS PCI-DA2100/PCI-DA2200 User's Manual
Appendix A
CD-ROM
®
143