Appendix E Troubleshooting Guide - Asus PCI-DA2100 User Manual

Appendix E
NOTE:
The following is a checklist of the common problems encountered during
installation. For failures that occur during operation, refer to the failure
recovery procedure in the "Disk Failure Management" section.
PROBLEM
Text RAID Manager indicates
a SCSI channel failure
detected upon start-up (SCSI
cables connected).
Initialization failure
Cannot detect SCSI drive
Parity error detected
Logical drive failure detected
during boot-up
ASUS PCI-DA2100/PCI-DA2200 User's Manual
Troubleshooting Guide
1. Check ID numbers (must be
unique for each device on the
same SCSI channel).
2. Make sure terminators are
properly installed.
3. Check the voltage output of the
power supply.
1. Check ID numbers (must be
unique for each device on the
same SCSI channel).
2. Make sure terminators are
properly installed.
1. Check drive power connections.
2. Check drive SCSI cable
connections.
3. Check ID numbers (must be
unique for each device on the
same SCSI channel).
1. DRAM SIMM should be
replaced.
1. Check proper installation or
connection of the drives (use the
"View SCSI drives" function to
help locate the problem).
Appendix E
CHECK
189