Windows ® Nt 4.0 Workstations - Asus SL1200 Quick Installation Manual

®
Windows NT 4.0 workstations
Check for the IP protocol and, if necessary, install it.
1. In the Windows NT task bar, click Start -> Settings -> Control Panel.
. In the Control Panel window, double click the Network icon.
. In the Network dialog box, click the Protocols tab.
The Protocols tab displays a list of currently installed network protocols.
If the list includes TCP/IP Protocol, then the protocol has already been
enabled. Skip to step 9.
4. If TCP/IP does not display as an installed component, click <Add>.
5. In the Select Network Protocol dialog box, select TCP/IP, and then
click <OK>.
You may be prompted to install files from your Windows NT installation
CD or other media. Follow the instructions to install the files.
After all files are installed, a window displays to inform you that a
TCP/IP service called DHCP can be set up to dynamically assign IP
information.
. Click <Yes> to continue, and then click <OK> if prompted to restart
your computer.
Next, configure the PCs to accept IP addresses assigned by the router.
7. Open the Control Panel window, and then double-click the Network
icon.
8. In the Network dialog box, click the Protocols tab.
9. In the Protocols tab, select TCP/IP, and then click <Properties>.
10. In the Microsoft TCP/IP Properties dialog box, click the radio button
labeled Obtain an IP address from a DHCP server.
11. Click <OK> twice to confirm and save your changes, and then close
the Control Panel.
ASUS SL100
9