Asus PCI-DA2100 User Manual page 235

controller and to the host computer's SNMP settings before the
two can communicate using SCSI commands. (Note: The SNMP
settings must be changed prior to installation of the GUI RAID
Manager. See SNMP Settings below for a detailed explanation.)
The RAID controller settings can be changed using the Front
Panel. (Your front panel may be different in appearance from the
one shown in this example.)
ATTEN BUSY
From the Main Menu, press t or s
to select
Configuration Parameters. "
Press <Enter>; and then use the t or
to select
s
Parameters." Then press <Enter>.
You will need to make adjustments in the following four
submenu's: Peripheral Device Type, Peripheral Device Qualifier,
Device Support for Removable Media, and LUN Application.
Different host operating systems require different adjustments.
Look at the table below to find the proper settings for your host
operating system.
2.3 In-band SCSI
Controller v2.11
Ready
"View and
"Host-side
ASUS GUI RAID Manager: Installation
POWER
ENT ESC
View and Edit
Config Parms
Edit
Host-side SCSI
Parameters
SCSI
..
2-9