Installing Sparc Driver & Text Raid Manager - Asus PCI-DA2100 User Manual

8.4 Installing SPARC Driver & Text RAID Manager
A. Installing from the driver diskette created from image file
A1. To install the driver from the driver diskette, type:
# pkgadd -d /floppy/floppy0
where "/floppy/floppy0" is the mounted driver diskette. Use
Solaris Volume Manager and "volcheck" to mount the driver
diskette, or mount it manually.
A2. A list of selections will show as below, choose "3" to install the
driver for ASUS PCI-DA2100/-DA2200.
The following packages are available:
1 RAID In-band SCSI Driver for Solaris 2.5,2.6
2 ASUS Text RAID Management for Solaris 2.5,2.6
3 PCI-SCSI RAID Host Adapter Driver
4 RAID SNMP SUBAGENT for Solaris 2.5,2.6
Select package(s) you will to process (or 'all' to process
all packages). (default: all) [?,??,q]: 3
A3. After the driver has been installed, the same selections appear
again. Choose "2" this time to install the ASUS Text RAID
Manager for Solaris.
A4. After the driver installed, the same selections appear again.
Choose "4" this time to install the RAID SNMP sub-agent for
Solaris. This step can be ignored if SNMP remote administration
is not going to be. If TCP/IP protocol and SNMP service have not
yet installed on this system, it can be installed later after the
system TCP/IP and SNMP installed. The RAID SNMP sub-agent
is not a must to be installed. Install it only when needed.
A5. Choose "q" to quit when the same list of selections appear again.
A6. Reboot the system.
# init 6
A7. After the system reboot, type "boot -r" in the boot screen to let the
Solaris knows to look for new device drivers and incorporate
them as part of the boot process.
ASUS PCI-DA2100/PCI-DA2200 User's Manual
Appendix A
181