IBM 8853L6U Service Manual page 39

8. (Optional) Write identifying information on one of the labels that come with the
blade servers and place the label on the BladeCenter unit bezel. See the
documentation for your BladeCenter unit for information about the label
placement.
Important: Do not place the label on the blade server or in any way block the
ventilation holes on the blade server.
If you have changed the configuration of the blade server or if you are installing a
different blade server from the one that you removed, you must configure the blade
server through the Configuration/Setup Utility, and you might have to install the
blade server operating system. Detailed information about these tasks is available
in the Installation and User's Guide.
Chapter 4. Removing and replacing blade server components
23